• 1365444900_IMG_310581.jpg
  • 1365445216_964113.jpg
1

Blackmagic Design ATEM Studio Converter 2

RM 8,995.00
RM 8,995.00
RM 11,220.00
Fast shipping | CXG | Creator X Gear | Malaysia
Fast shipping
Secure payments | CXG | Creator X Gear | Malaysia
Secure payments
Authentic products | CXG | Creator X Gear | Malaysia
Authentic products
View More

Highlights

  • Includes four bidirectional converters in a 1 RU unit for compact installation.
  • Supports optical fiber signal transmission up to 28 miles, converting signals to SDI for switcher use.
  • Provides four fiber to SDI 10-bit converters with switchable SD/HD-SDI outputs.
  • Includes camera talkback features with select, volume, and mute controls for operator communication.
  • Designed for integration with ATEM switchers and converters, supporting tally outputs and program feeds to fiber-connected cameras.
✦ AI-generated

Key Features

  • 4 Bidirectional Converters in 1 RU Unit
  • Optical Fiber Signal Range 28 Miles
  • Connects up to 4 ATEM Camera Converters
  • 4 x Fiber to SDI 10-bit Converters
  • 4 x Switchable SD/HD-SDI Outputs
  • Camera Talkback with Select, Vol & Mute
  • Connect to ATEM Switchers/Converters
  • Supports SDI Switcher Tally Output
  • Send PGM Feed to Fiber Connected Cameras

The Blackmagic Design Studio Converter 2 inputs video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables. By comparison, sending an HD-SDI signal over traditional copper cable is usually limited to about 300 feet, depending on the quality of the cable.

A typical set up using the Studio Converter 2 is to connect it between the switcher and up to four ATEM Camera Converter units. This setup allows the Converter 2 to receive the signals from the fiber cable, convert the signals to SDI using 10-bit processing, and send the signals to the switcher. The Converter 2 supports SD/HD signals, and when using the available ATEM Camera Converter you can use any camera with an SDI/HDMI output.

The Converter 2 can also be used as 4 independent simultaneous bidirectional SD/HD-SDI to optical converters. The Converter 2 features a built-in mic input, speaker and headphone jack that provides talkback audio for communicating with camera operators. The Converter 2 passes tally signals embedded in the SDI program stream. You can cascade multiple ATEM Studio Converter 2 units together when using more than 4 cameras. The Studio Converter 2 features a 1 RU design with built in rackmount ears for easy integration into existing studio configurations or production cases. 

In the Box

  • Blackmagic Design ATEM Studio Converter 2
  • Converter Utility Software
  • 1-Year Limited Warranty

Not in the Box

  • Essential Required Power Cable (Not Included)

Follow us @
https://www.facebook.com/cxgstore/
https://www.instagram.com/creatorxgear/

Frequently asked questions

How many converters does this unit have and what is its size?
This unit contains 4 bidirectional converters in a single 1 RU size rack unit.
✦ AI-generated
What is the maximum distance video signals can be sent using this converter with optical fiber?
Video signals can be transmitted up to 28 miles over optical fiber when using this converter with compatible camera converters.
✦ AI-generated
Can this unit be used with any camera?
Yes, when used with the ATEM Camera Converter, it supports any camera with an SDI or HDMI output.
✦ AI-generated
Does this converter support SD and HD video formats?
Yes, it supports both standard definition (SD) and high definition (HD) signals.
✦ AI-generated
Is there a way to communicate with camera operators using this converter?
Yes, it has a built-in microphone input, speaker, and headphone jack that allows talkback audio communication with camera operators.
✦ AI-generated